What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P2441Secondary Air Injection System Switching Valve Stuck Close Bank 1 •Manufacturer communications
4Original wording in English
HINO
Reported code forms P2441
The Burner Control Module (BCU) judges DTC?s P2441 (CAV Stuck), P2300 (Ignition Coil Failure) and P060C (BCU Temp Sensor Failure) on burner start up, if one of the fault conditions is met the BCU can go into a temporary…
HINO
Reported code forms P2441
TT-14-011 11MY-14MY Conventional Truck ? NAPS Regen will not complete. The Burner Control Module (BCU) judges DTC?s P2441 (CAV Stuck), P2300 (Ignition Coil Failure) and P060C (BCU Temp Sensor Failure) on burner start…
TOYOTA
Reported code forms P2441
Some 2005 ? 2009 model year 4Runner, 2006 ? 2007 model year Land Cruiser, 2005 ? 2007 model year Sequoia, and 2005 ? 2006 model year Tundra vehicles equipped with the 2UZ-FE (4.7 L) engine may exhibit a MIL ?ON?…
TOYOTA
Reported code forms P2441
Some 2005 - 2009 model year 4Runner, 2006 - 2007 model year Land Cruiser, 2005 - 2007 model year Sequoia, and 2005 - 2006 model year Tundra vehicles equipped with the 2UZ-FE (4.7 L) engine may exhibit a MIL "ON"…
Check vehicle applicability
20A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Hino | CONVENTIONAL MODELS | 2014 |
| Hino | CONVENTIONAL MODELS | 2013 |
| Hino | CONVENTIONAL MODELS | 2012 |
| Hino | CONVENTIONAL MODELS | 2011 |
| Hino | CONVENTIONAL TRUCKS W/JO8 | 2014 |
| Hino | CONVENTIONAL TRUCKS W/JO8 | 2013 |
| Hino | CONVENTIONAL TRUCKS W/JO8 | 2012 |
| Hino | CONVENTIONAL TRUCKS W/JO8 | 2011 |
| Toyota | 4RUNNER | 2009 |
| Toyota | 4RUNNER | 2008 |
| Toyota | 4RUNNER | 2007 |
| Toyota | 4RUNNER | 2006 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.