What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0019Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor BP0019Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 2P0019Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 2P0019STRETCHED PRIMARY DRIVE AND BOTH SECONDARY DRIVE TIMING CHAINS (REPLACE PRIMARY DRIVE AND BOTH SECONDARY DRIVE TIMING CHAINS)View all · Manufacturer wording →
Manufacturer communications
41Original wording in English
SUBARU
Reported code forms P0019
This bulletin announces the availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0014, P0024, P0128, P2109. If any of the DTCs…
FORD, LINCOLN
Reported code forms P0019
Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. Pinpoint test HK in…
SUBARU
Reported code forms P0019
"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: • P0016: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A •…
SUBARU
Reported code forms P0019
"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: • P0016: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A •…
SUBARU
Reported code forms P0019
"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: • P0016: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A •…
SUBARU
Reported code forms P0019
"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0087."
Check vehicle applicability
393A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A4 | 2009 |
| Audi | A5 | 2009 |
| Audi | Q5 | 2009 |
| Buick | ALLURE | 2009 |
| Buick | ALLURE | 2008 |
| Buick | ALLURE | 2007 |
| Buick | ALLURE | 2006 |
| Buick | BUICK | Year not specified |
| Buick | ENCLAVE | 2018 |
| Buick | ENCLAVE | 2017 |
| Buick | ENCLAVE | 2016 |
| Buick | ENCLAVE | 2015 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.