What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
C0037-2FLeft Rear Wheel Speed Sensor - Signal ErraticC0037-01Left rear speed sensor - General electrical failureC0037-29Left rear speed sensor - Invalid signalC0037-1DLeft Rear Wheel Speed Sensor-Circuit Current Out of RangeView all · Manufacturer wording →
Manufacturer communications
44Original wording in English
RAM
Reported code forms C0037-2F C0037-62
Max Tow Right and Left Rear Wheel Speed Sensors Inoperable Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic…
FORD
Reported code forms C0037:01 C0037:07 C0037:2F C0037:4A C0037:64
Some of the vehicles listed in the Model statement above may exhibit an illuminated yellow/red anti-lock brake system (ABS) warning indicator with diagnostic trouble codes (DTCs) C0037:01, C0037:07, C0037:2F, C0037:4A,…
RAM
Reported code forms C0037-2F
Flash: Brake System Control Module (BSCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes…
RAM
Reported code forms C0037-2F
Flash: Brake System Control Module (BSCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes…
RAM
Reported code forms C0037-2F
Flash: Brake System Control Module (BSCM) Updates Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic…
RAM
Reported code forms C0037-2F C0037-62
Max Tow Right and Left Rear Wheel Speed Sensors Inoperable Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes…
Check vehicle applicability
56A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| FCA | ALL MODELS | 2015 |
| FCA | ALL MODELS | 2014 |
| FCA | ALL MODELS | 2013 |
| FCA | ALL MODELS | 2012 |
| FCA | ALL MODELS | 2011 |
| FCA | ALL MODELS | 2010 |
| FCA | ALL MODELS | 2009 |
| FCA | ALL MODELS | 2008 |
| FCA | ALL MODELS | 2007 |
| FCA | ALL MODELS | 2006 |
| FCA | FCA | Year not specified |
| Ford | BRONCO | 2025 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.