18-082-16

Flash: 6.4L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTCs: · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance.** · P0456 - EVAP System Small Leak. · P3402 - Cylinder 1 Deactivation Control Performance. · P3426 - Cylinder 4 Deactivation Control Performance. · P3442 - Cylinder 6 Deactivation Control Performance. · P3450 - Cylinder 7 Deactivation Control Performance. · P2610 - PCM Internal Engine Off Timer Performance set in the PCM memory. In addition to the DTCs listed above, the software update will improve: · **Correct an issue related to rounding of the cruise control set speed displayed in the cluster. · Brake Throttle Override calibration has changed to be less sensitive. · Throttle Body supplier change has caused a widening of the minimum and maximum voltage limits · Correct a software issue with oil pressure light function at key-up. · Correct a software issue related to idle timer. · Correct a software issue with inconsistent engine RPM increments/decrements with operator idle speed.(DD/DF/DP ONLY).** · Improved Cruise Control Acceleration mode. · Improved Multi Displacement System operation 6-Speed Automatic 66RFE transmission (Sales Code DFP). · Multi Displacement System function improved while in PTO stationary mode. 6-Speed Auto Aisin AS66RC transmission (Sales Code DF3). · Potential small improvement in fuel economy at higher altitudes. · Potential improvement in high altitude engine idle RPM stability. · EGR monitor status function.