JEEP
21-008-25
Comunicaciones del fabricante
- Fecha de publicación
- 2025-01-11
- Recibido por NHTSA
- 2025-01-14
- Números de registro NHTSA
- 11012826
Resumen del fabricante
Texto original en inglés
"Flash: Transmission Control Module (TCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• P1614-00 - ECU Reset/Recovery Occurred.
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
• P1614-00 - ECU Reset/Recovery Occurred.
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
Códigos en el documento
Descripción del fabricante
El texto puede variar por vehículo y sufijo; no es un diagnóstico universal.
Jeep
P0810-00Clutch Position Control ErrorJeep
P1614-00ECU Reset/Recovery OccurredComprueba la compatibilidad
La relación con un vehículo es una pista. Confirma motor, producción y software en la documentación del fabricante.
| Marca | Modelo | Año del modelo |
|---|---|---|
| Jeep | GRAND CHEROKEE | 2024 |
| Jeep | GRAND CHEROKEE L | 2024 |