JEEP
08-142-24
Herstellerinformationen
- Veröffentlichung
- 2024-06-20
- Bei NHTSA eingegangen
- 2024-06-25
- NHTSA-Datensatznummern
- 11002074
Herstellerzusammenfassung
Englischer Originaltext
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• P1129 - Closed Loop Fueling Not Achieved - Bank 2 Upstream.
• P0158 - O2 Sensor 2/2 Circuit High.
• P0152 - O2 Sensor 2/1 Circuit High.
• P2504 - Charging System Output High.
• P0563 - Battery/system Voltage High (eTorque). Customers may also comment on the following:
• Customer finds Check Engine Light on and vehicle runs rough. This bulletin involves reprogramming the PCM with the latest available software."
• P1129 - Closed Loop Fueling Not Achieved - Bank 2 Upstream.
• P0158 - O2 Sensor 2/2 Circuit High.
• P0152 - O2 Sensor 2/1 Circuit High.
• P2504 - Charging System Output High.
• P0563 - Battery/system Voltage High (eTorque). Customers may also comment on the following:
• Customer finds Check Engine Light on and vehicle runs rough. This bulletin involves reprogramming the PCM with the latest available software."
Codes im Original
Wortlaut des Herstellers
Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.
Jeep
P0152O2 Sensor 2/1 Circuit HighJeep
P0158O2 Sensor 2/2 Circuit HighJeep
P0563Battery/system Voltage High (eTorque)Jeep
P1129Closed Loop Fueling Not Achieved - Bank 2 UpstreamJeep
P2504Charging System Output HighFahrzeugzuordnung prüfen
Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.
| Marke | Modell | Modelljahr |
|---|---|---|
| Jeep | WRANGLER | 2024 |