HomeP2300 · Code meaning and manufacturer information
Powertrain

P2300

Code meaning and manufacturer information

P2300

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

Alfa RomeoP2300-00
Ignition Coil 9A9 Primary Control Circuit Low

NHTSA 10236936

Alfa RomeoP2300-00
Ignition Coil A Primary Control Circuit Low

NHTSA 10241132

Manufacturer communications

7

Original wording in English

1802223

ALFA ROMEO

Reported code forms P2300-00

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble…

Read communication ↗

1802323

RAM

Reported code forms P2300-00

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble…

Read communication ↗

1802223

ALFA ROMEO

Reported code forms P2300-00

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble…

Read communication ↗

TT-14-011

HINO

Reported code forms P2300

The Burner Control Module (BCU) judges DTC?s P2441 (CAV Stuck), P2300 (Ignition Coil Failure) and P060C (BCU Temp Sensor Failure) on burner start up, if one of the fault conditions is met the BCU can go into a temporary…

Read communication ↗

167-T1411-12

HINO

Reported code forms P2300

TT-14-011 11MY-14MY Conventional Truck ? NAPS Regen will not complete. The Burner Control Module (BCU) judges DTC?s P2441 (CAV Stuck), P2300 (Ignition Coil Failure) and P060C (BCU Temp Sensor Failure) on burner start…

Read communication ↗

PIP5147A

CHEVROLET, GMC

Reported code forms P2300

This Preliminary Information communication provides information to the technician about vehicles that have an engine misfire. Technician may find Diagnostic Trouble Codes P0351-P0358, P2300, P2301, P2303, P2304, P2306,…

Read communication ↗

View all →

Check vehicle applicability

13

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all vehicle records →

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.