What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P1061Cylinder 1 Oil Supply Solenoid Valve StuckManufacturer communications
7Original wording in English
FORD
Reported code forms P1061
Some of the vehicles listed in the Model statement above may exhibit an incorrectly illuminated malfunction indicator lamp (MIL) and an illuminated powertrain malfunction (wrench) indicator with a reduced engine power…
FORD, LINCOLN
Reported code forms P1061
In some of the affected vehicles, after safety recall 23S27 has been performed, the Malfunction Indicator Light (MIL) may illuminate and store Diagnostic Trouble Codes (DTCs) P1061 and/or P032F. This could be due to a…
FORD, LINCOLN
Reported code forms P1061
Certain 2021-2022 Model Year Corsair, 2020-2022 Model Year Escape and 2022-2023 Model Year Maverick Vehicles Equipped With 2.5L HEV/PHEV Engine Long Block Replacement In some of the affected vehicles, after safety…
JEEP
Reported code forms P1061
Flash: Powertrain Control Module (PCM) Updates Customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic…
JEEP
Reported code forms P1061
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble…
MACK
Reported code forms P1061 - 54
Automated Manual Transmission ( AMT - F ) Volvo (I-Shift) And Mack (M-Drive) Gearbox Calibration Information (Possible Diagnostic Trouble Code (DTC) P1061 - 54)
Check vehicle applicability
9A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.