What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0715INPUT SPEED SENSOR AP0715-64Input/Turbine Shaft Speed Sensor "A" Circuit - signal plausibility failureP0715INPUT SPEED SENSOR AManufacturer communications
26Original wording in English
FORD, LINCOLN
Reported code forms P0715
Some 2015-2016 vehicles equipped with 6F50/6F55 transmission and built on 2-Nov-2015 and through 1-Feb-2016 may exhibit no reverse, 3rd and 5th gear with diagnostic trouble codes (DTCs) P0715,P0717,P0756 and/or P2701.…
NISSAN
Reported code forms P0715
“SERVICE AT POWER REDUCED” WARNING DISPLAYED AND DTC P0715 STORED IN THE TCM IF YOU CONFIRM The customer states the “Service AT Power reduced” warning message (Figure 1) is/was displayed, AND DTC P0715 (INPUT SPEED…
INFINITI
Reported code forms P0715
“SERVICE AT POWER REDUCED” WARNING DISPLAYED AND DTC P0715 STORED IN THE TCM IF YOU CONFIRM The client states the “Service AT Power reduced” warning message (Figure 1) is/was displayed, AND DTC P0715 (INPUT SPEED SENSOR…
TOYOTA
Reported code forms P071531
TSB: Some 2017 ? 2018 model year Highlander and Sienna vehicles may exhibit a whine noise while driving, a harsh shift, MIL ON, or reduced power. The following Diagnostic Trouble Codes (DTCs) may be present: P07457F,…
FORD
Reported code forms P0715
Some 2020-2021 Super Duty vehicles equipped with an 10R140 automatic transmission may exhibit an illuminated malfunction indicator lamp (MIL) and/or powertrain malfunction (wrench) indicator lamp with diagnostic trouble…
INFINITI
Reported code forms P0715
PERMANENT DTC SET IN TCM AND WILL NOT ERASE IF YOU CONFIRM One or more of the following DTCs are stored in the permanent DTC screen (Figure 1): P0715, P0716, P0718, P0730, P0791, P0793, P0794, P1722, P1742, P1745,…
Check vehicle applicability
96A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A5 CABRIOLET | 2012 |
| Audi | A5 CABRIOLET | 2011 |
| Audi | A5 CABRIOLET | 2010 |
| Audi | RS 5 CABRIOLET | 2013 |
| Audi | RS5 | 2014 |
| Audi | RS5 | 2013 |
| Audi | S4 | 2014 |
| Audi | S4 | 2013 |
| Audi | S4 | 2012 |
| Audi | S4 | 2011 |
| Audi | S4 | 2010 |
| Audi | S5 | 2014 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.