What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0222Throttle Position Sensor 2 Circuit LowP0222Throttle Position Sensor 2 Circuit LowP0222THROTTLE POSITION SENSOR NO.2 CIRCUIT LOW INPUTDTCSP0222Throttle Position Sensor 2 Circuit LowView all · Manufacturer wording →
Manufacturer communications
26Original wording in English
FORD
Reported code forms P0222
Some 2012-2014 Focus vehicles equipped with a 2.0L gasoline direct injection (GDI) engine may exhibit concerns of engine runs rough, crank no-start, loss of power, loss of engine RPM, and/or illuminated MIL with…
DODGE
Reported code forms P0222
Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL)…
FORD
Reported code forms P0222
SOME 2014-2016 TRANSIT CONNECT VEHICLES EQUIPPED WITH THE 2.5L ENGINE MAY EXHIBIT A CONSTANT OR INTERMITTENT ILLUMINATED MIL WITH VARIOUS DRIVABILITY ISSUES AND ONE OR MORE OF THE FOLLOWING DTCS: P0010, P0103, P0104,…
JEEP
Reported code forms P0222
Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon…
JEEP
Reported code forms P0222
Flash: Transmission Shift And Drivability Enhancements Flash: Transmission Shift And Drivability Enhancements Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the…
DODGE
Reported code forms P0222
Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL)…
Check vehicle applicability
66A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A3 | 2009 |
| Audi | A3 | 2008 |
| Audi | A3 | 2007 |
| Audi | A3 | 2006 |
| Audi | A4 | 2009 |
| Audi | A4 | 2008 |
| Audi | A4 | 2007 |
| Audi | A4 | 2006 |
| Audi | A4 | 2005 |
| Audi | A4 CABRIOLET | 2008 |
| Audi | A4 CABRIOLET | 2007 |
| Audi | A6 | 2009 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.