What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0137CIRCUIT LOW INPUTP0137MINIMUM VOLTAGE MONITORINGP0137HO2S CIRCUIT LOW INPUTP0137HO2S2 (B1) (Heated oxygen sensor 2 circuit low voltage)View all · Manufacturer wording →
Manufacturer communications
42Original wording in English
SUBARU
Reported code forms P0137
"This bulletin announces the availability of new oxygen sensors developed to address the following Diagnostic Trouble Codes (DTCs) detected by the Engine Control Module: • P0137: O2 Sensor Circuit Low Voltage Bank 1…
SUBARU
Reported code forms P0137
This bulletin announces the availability of new oxygen sensors developed to address the following Diagnostic Trouble Codes (DTCs); P0137 (O2 Sensor Circuit Low Voltage Bank 1 Sensor 2, P0138 (O2 Sensor Circuit High…
FORD, LINCOLN
Reported code forms P0137
Some 2019-2020 Edge/Nautilus vehicles equipped with 2.0L EcoBoost engine and built on or before 14-Oct-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0137, P0141…
JEEP
Reported code forms P0137
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve…
JEEP
Reported code forms P0137
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve…
JEEP
Reported code forms P0137
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve…
Check vehicle applicability
200A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Buick | ENCLAVE | 2015 |
| Buick | ENCLAVE | 2014 |
| Buick | ENCLAVE | 2013 |
| Buick | ENVISION | 2017 |
| Buick | ENVISION | 2016 |
| Buick | REGAL | 2017 |
| Buick | REGAL | 2016 |
| Buick | REGAL | 2015 |
| Buick | REGAL | 2014 |
| Cadillac | ATS | 2017 |
| Cadillac | ATS | 2016 |
| Cadillac | ATS | 2015 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.