What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0113-00Intake Air Temperature Sensor 1 Circuit High Bank 1 no sub type informationP0113INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT HIGH INPUTP0113INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT HIGH INPUTManufacturer communications
16Original wording in English
FORD, LINCOLN
Reported code forms P0113
Some 2024-2026 Explorer/Aviator/Police Interceptor Utility vehicles may exhibit an illuminated malfunction indicator (MIL) lamp with engine over-temperature warning in the message center and poor air conditioning (A/C)…
RAM
Reported code forms P0113
Malfunction Indicator Lamp (MIL) on, P0052, P0152, O2 Sensor High, P0113 Intake Air Sensor (IAT)
RAM
Reported code forms P0113
Check Engine Light On, P0113 Intake Air Temperature Sensor 1 Circuit High
JAGUAR
Reported code forms P0113-00
A Customer may report one or more of: ?Lack of power ?Restricted performance displayed on Instrument Cluster (IC) ?Malfunction Indicator Light (MIL) appears on Instrument Cluster (IC). One or more of the following DTC?s…
JAGUAR
Reported code forms P0113-00
A Customer may report one or more of: ?Lack of power ?Restricted performance displayed on Instrument Cluster (IC) ?Malfunction Indicator Light (MIL) appears on Instrument Cluster (IC). One or more of the following DTC?s…
FIAT, JEEP
Reported code forms P0113
Malfunction Indicator Lamp (MIL) Illumination Diagnostic Trouble Code (DTC) P0113 The wiring at the connector of the Intake Air Temperature (IAT) sensor may be compromised due to wire strain causing DTCs. This bulletin…
Check vehicle applicability
87A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A8 | 2006 |
| Audi | A8 | 2005 |
| Audi | A8 | 2004 |
| Audi | A8 | 2003 |
| Audi | ALLROAD | 2004 |
| Audi | RS6 | 2004 |
| Audi | RS6 | 2003 |
| Audi | S4 | 2008 |
| Audi | S4 | 2007 |
| Audi | S4 | 2006 |
| Audi | S4 | 2005 |
| Audi | S4 | 2004 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.