What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0013Bank 1 Camshaft 2 Position Actuator Circuit OpenP0013Bank 1 Camshaft 2 Position Actuator Circuit OpenP0013Exhaust Camshaft Position Actuator Solenoid Valve Control CircuitP0013Exhaust Camshaft Position Actuator Solenoid Valve Control CircuitView all · Manufacturer wording →
Manufacturer communications
12Original wording in English
DODGE
Reported code forms P0013
"No Start, Loose Ground Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0010 - Bank 1 Camshaft…
DODGE
Reported code forms P0013
"No Start, Loose Ground Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0010 - Bank 1 Camshaft…
CHRYSLER, DODGE
Reported code forms P0013
Cam Phaser Actuators Replacement Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs)…
JEEP
Reported code forms P0013
3.6L Check Engine Light and Rough Running Engine This bulletin involves cutting off a wiring harness eyelet and splicing in a pigtail to the engine ground harness. Customers may experience a Malfunction Indicator Lamp…
RAM
Reported code forms P0013
3.6L Check Engine Light and Rough Running Engine This bulletin involves cutting off a wiring harness eyelet and splicing in a pigtail to the engine ground harness. Customers may experience a Malfunction Indicator Lamp…
RAM
Reported code forms P0013
Oil Control Valve Connector Not Seated This bulletin involves inspecting the oil control valve connector and possibly seating the connector. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon…
Check vehicle applicability
23A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Buick | REGAL | 2014 |
| Cadillac | ATS | 2014 |
| Cadillac | ATS | 2013 |
| Cadillac | CTS | 2014 |
| Chevrolet | EQUINOX | 2012 |
| Chevrolet | EQUINOX | 2011 |
| Chevrolet | EQUINOX | 2010 |
| Chevrolet | MALIBU | 2014 |
| Chevrolet | MALIBU | 2013 |
| Chrysler | 300 | 2023 |
| Dodge | CHALLENGER | 2023 |
| Dodge | CHARGER | 2023 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.