What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0010variable valve timing control [VTC] malfunctionP0010Bank 1 Camshaft 1 Position Actuator Circuit OpenP0010INTAKE CAMSHAFT POSITION ACTUATOR SOLENOID VALVE CONTROL CIRCUITP0010INTAKE CAMSHAFT POSITION ACTUATOR SOLENOID VALVE CONTROL CIRCUITView all · Manufacturer wording →
Manufacturer communications
35Original wording in English
MAZDA
Reported code forms P0010
Some vehicles may experience a CHECK ENGINE light ON with DTC P0012, P0011, and possibly P0010. This may be caused by a malfunction in the intake EVVT motor that prevents it from accurately regulating the intake…
DODGE
Reported code forms P0010
"No Start, Loose Ground Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0010 - Bank 1 Camshaft…
DODGE
Reported code forms P0010
"No Start, Loose Ground Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0010 - Bank 1 Camshaft…
CHRYSLER, DODGE
Reported code forms P0010
Cam Phaser Actuators Replacement Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs)…
HONDA
Reported code forms P0010
Service Bulletin - There is a software problem in the PCM, which may cause the MIL to come on with DTC P26A3 (electric water valve malfunction), DTC P100C (electric VTC motor speed signal circuit malfunction) and/or…
MITSUBISHI
Reported code forms P0010
This Technical Information Notice was sent to dealers providing instructions for reprogramming the Engine Control Module pertaining to DTC P0010 - P0017.
Check vehicle applicability
59A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Cadillac | ATS | 2013 |
| Cadillac | CTS-V | 2018 |
| Cadillac | ESCALADE | 2020 |
| Cadillac | ESCALADE | 2018 |
| Chevrolet | CAMARO | 2020 |
| Chevrolet | CAMARO | 2018 |
| Chevrolet | CORVETTE | 2018 |
| Chevrolet | EQUINOX | 2012 |
| Chevrolet | EQUINOX | 2011 |
| Chevrolet | EQUINOX | 2010 |
| Chevrolet | MALIBU | 2013 |
| Chevrolet | SILVERADO 1500 | 2020 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.