JEEP
21-041-24 REV. A
Manufacturer communications
- Publication date
- 2024-10-04
- Received by NHTSA
- 2024-10-08
- NHTSA record numbers
- 11008751
Manufacturer summary
Original wording in English
"Flash: Transmission Control Module (TCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• **P1614-00 - ECU Reset/Recovery Occurred.**
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• **Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).**
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
• **P1614-00 - ECU Reset/Recovery Occurred.**
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• **Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).**
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
Reported code forms
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
Jeep
P0810-00Clutch Position Control ErrorJeep
P1614-00ECU Reset/Recovery OccurredCheck vehicle applicability
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Jeep | GRAND CHEROKEE | 2024 |