P2450

FORD

原文故障碼 P2450

This bulletin supersedes 26-2238. Reason for update: To update the Service Procedure to include diagnostics for the fuel vapor vent valve and the fuel tank isolation valve. Some of the vehicles listed in the Model…

查看通報 ↗

FORD, LINCOLN

原文故障碼 P2450

This bulletin supersedes 25-2326. Reason for update: update the service procedure to include the fuel tank isolation valve replacement, update the causal part number, and increase the labor time allowance to include the…

查看通報 ↗

FORD

原文故障碼 P2450

This article supersedes TSB 26-2130 to update labor operation to reprogram the PCM and check EVAP system from actual time to fixed time, and add extra time to reprogram coordinated modules (if required). Some of the…

查看通報 ↗

FORD, LINCOLN

原文故障碼 P2450

Some vehicles listed in the Model section above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2418:72 and/or P2450 stored in the PCM. This may be due to improperly…

查看通報 ↗

FORD

原文故障碼 P2450

This article supersedes TSB 25-2246 to update the Service Procedure and add Step 2 to verify the EVAP system integrity after the coordinated software updates. Some of the vehicles listed in the Model statement above may…

查看通報 ↗

JEEP

原文故障碼 P2450

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician must find one or more of the following Diagnostic…

查看通報 ↗