首頁NTB18-016 · NISSAN
NISSAN

NTB18-016

原廠技術資料

發布日期
2018-02-27
NHTSA 接收日期
2018-03-26
NHTSA 收錄編號
10130502

原廠摘要

以下為英文原文

2018 PATHFINDER; MIL ON WITH DTC P34A5, AND/OR P34A9 STORED IF YOU CONFIRM MIL is ON with one or both of the following DTCs: -P34A5 (A camshaft posi actuator temp sens B1) -P34A9 (A camshaft posi actuator temp sens B2) And Outside ambient temperature was near or below freezing (32°F) when the DTCs were stored. NOTE: If any VTC DTCs other than P34A5 and/or P34A9 are also stored (example: P0011, P0021), those DTCs should be diagnosed and resolved first. ACTION Replace the electric intake valve timing control module (see Figure 1 on Page 2). -Electric intake valve timing control module is listed in the Parts Information of this bulletin. -Refer to the Electronic Service Manual (ESM), section ENGINE > ENGINE CONTROL SYSTEM, for replacement information. -Make sure to perform Electric IVT Control Actuator Position Learning after replacement of the module.

NHTSA 原廠通報資料 ↗

原文故障碼

原廠原文中的含義

原文含義可能隨車型與後綴變化。此處依來源顯示,不代表通用診斷結論。

核對適用車輛

車型關聯可作查閱線索;引擎、生產範圍與軟體條件請核對原廠資料。

品牌車型年式
NissanPATHFINDER2018

資料涵蓋範圍 →