这个码是什么意思?
以下表述对应所列厂商与通报。使用前请核对完整报码、报码模块、年款和发动机。
故障码描述检测到的异常,不直接指定必须更换的零件。
厂商原文中的含义
原文含义可能随车型和后缀变化。此处按来源展示,不代表通用诊断结论。
P1A0C-00Battery Energy Control Module System Voltage Low厂商技术资料
17以下为英文原文
JEEP
原文报码 P1A0C-00
Flash: Battery Pack Control Module (BPCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes…
FORD, LINCOLN
原文报码 P1A0C
This article supersedes TSB 22-2177 to update labor times from M-time to AP-time and add a limit. Some of the vehicles listed in the model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with…
FORD, LINCOLN
原文报码 P1A0C
Certain 2020 - 2022 Model Year Aviator PHEV and Explorer PHEV Vehicles Reprogram Powertrain Control Module In all of the affected vehicles, if the vehicle is charging via the charging cable and the customer requests a…
FORD, LINCOLN
原文报码 P1A0C
Some 2020-2022 Explorer/Aviator Hybrid vehicles built on or before 11-Apr-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble code (DTC) P1A0C stored in the PCM. This may be due…
LINCOLN
原文报码 P1A0C
Some 2020-2022 Aviator Hybrid vehicles may exhibit an illuminated MIL and a Stop Safely Now message with only DTC P1A0C stored in the PCM. This may be due to the software in the battery energy control module (BECM). The…
FORD
原文报码 P1A0C
In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor…
核对适用车辆
34车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。
| 品牌 | 车型 | 年款 |
|---|---|---|
| Ford | ESCAPE | 2021 |
| Ford | ESCAPE | 2020 |
| Ford | ESCAPE | 2013 |
| Ford | ESCAPE | 2008 |
| Ford | ESCAPE HYBRID | 2021 |
| Ford | ESCAPE HYBRID | 2020 |
| Ford | ESCAPE HYBRID | 2005 |
| Ford | EXPEDITION | 2008 |
| Ford | EXPEDITION | 2007 |
| Ford | EXPEDITION | 2006 |
| Ford | EXPEDITION | 2005 |
| Ford | EXPLORER | 2022 |
更换零件之前
记录报码及冻结帧,检查蓄电池状态、相关报码和可见的线束或软管损伤。按照该车诊断流程和测试结果决定维修,避免仅凭故障码换件。
还能继续驾驶吗?
仅靠故障码无法判断是否适合继续行驶。故障灯闪烁、严重抖动、过热、机油压力报警或制动转向异常都需及时处理。影响车辆控制或发动机安全时,应在安全地点停车并寻求帮助。以车辆手册为准。