这个码是什么意思？
以下表述对应所列厂商与通报。使用前请核对完整报码、报码模块、年款和发动机。
故障码描述检测到的异常，不直接指定必须更换的零件。
厂商原文中的含义
原文含义可能随车型和后缀变化。此处按来源展示，不代表通用诊断结论。
P008BLOW PRESSURE FUEL SYSTEM, PRESSURE TOO HIGHP008BLow Fuel Pressure Too HighP008BLOW FUEL PRESSURE TOO HIGH厂商技术资料
10以下为英文原文
FORD, LINCOLN
原文报码 P008B
Some 2013-2015 Fusion/MKZ/Escape/MKC with a 1.6L GTDI, 1.5L GTDI, or 2.0L GTDI may exhibit a lack of power, loss of power, or stall when placed in gear with DTCs P00C6, P0087, P008A, P008B, P018C, or P018D. If normal…
JAGUAR
原文报码 P008B
The engine MIL (Malfunction Indicator Lamp) may be illuminated on the Instrument Cluster (IC) with DTC (Diagnostic Trouble Code) P008B stored in the Powertrain Control Module (PCM).
JAGUAR
原文报码 P008B
SITUATION: The engine Malfunction Indicator Lamp (MIL) may be illuminated on the Instrument Cluster (IC) with Diagnostic Trouble Code (DTC) P008B is stored in the Powertrain Control Module (PCM).
LAND ROVER
原文报码 P008B
"ISSUE: SYMPTOM: - ENGINE MIL ILLUMINATED ON IPC. ROUGH IDLE, HESITATION AND/OR LOSS OF POWER. ONE OR MORE OF THE FOLLOWING DTCS MAY BE SET IN THE PCM: • P008A, • P008B, • P2542. CAUSE: SUB-OPTIMAL PCM SOFTWARE…
LAND ROVER
原文报码 P008B
"SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED AND DIAGNOSTIC TROUBLE CODE (DTC) P008B IS STORED IN THE ENGINE CONTROL MODULE (ECM). CAUSE: THIS MAY BE CAUSED BY AN INTERNAL FAULT WITH THE…
INFINITI
原文报码 P008B
IF YOU CONFIRM: An APPLIED VEHICLE has the MIL 'ON' with DTC P008B (Low Fuel Pressure Too High) stored in the ECM. ACTION: 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you…
核对适用车辆
83车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。
| 品牌 | 车型 | 年款 |
|---|---|---|
| Audi | A3 | 2010 |
| Audi | A3 | 2009 |
| Audi | A3 | 2008 |
| Audi | A3 | 2007 |
| Audi | A3 | 2006 |
| Audi | A3 | 2005 |
| Audi | A4 | 2010 |
| Audi | A4 | 2009 |
| Audi | A4 | 2008 |
| Audi | A4 | 2007 |
| Audi | A4 | 2006 |
| Audi | A4 | 2005 |
更换零件之前
记录报码及冻结帧，检查蓄电池状态、相关报码和可见的线束或软管损伤。按照该车诊断流程和测试结果决定维修，避免仅凭故障码换件。
还能继续驾驶吗？
仅靠故障码无法判断是否适合继续行驶。故障灯闪烁、严重抖动、过热、机油压力报警或制动转向异常都需及时处理。影响车辆控制或发动机安全时，应在安全地点停车并寻求帮助。以车辆手册为准。