NTB22-084

DTC C1116 AND/OR C1142 STORED IN THE ABS CONTROL MODULE IF YOU CONFIRM Customer states the ABS warning light is ON and “System fault See Owner’s Manual” appears in the message center (Figure 1), AND DTCs C1116 (Stop Lamp Switch) and/or C1142 (Press Sen Circuit) are stored in the ABS Control Module. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Install the Center High Mount Stop Lamp (CHMSL) Relay and Jumper Harness. 2. Install a new Stop Lamp Switch. 3. Reprogram the ABS Control Module. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.