首页NTB18-016 · NISSAN
NISSAN

NTB18-016

厂商技术资料

发布日期
2018-02-27
NHTSA 接收日期
2018-03-26
NHTSA 收录编号
10130502

厂商摘要

以下为英文原文

2018 PATHFINDER; MIL ON WITH DTC P34A5, AND/OR P34A9 STORED IF YOU CONFIRM MIL is ON with one or both of the following DTCs: -P34A5 (A camshaft posi actuator temp sens B1) -P34A9 (A camshaft posi actuator temp sens B2) And Outside ambient temperature was near or below freezing (32°F) when the DTCs were stored. NOTE: If any VTC DTCs other than P34A5 and/or P34A9 are also stored (example: P0011, P0021), those DTCs should be diagnosed and resolved first. ACTION Replace the electric intake valve timing control module (see Figure 1 on Page 2). -Electric intake valve timing control module is listed in the Parts Information of this bulletin. -Refer to the Electronic Service Manual (ESM), section ENGINE > ENGINE CONTROL SYSTEM, for replacement information. -Make sure to perform Electric IVT Control Actuator Position Learning after replacement of the module.

NHTSA 厂商通报资料 ↗

原文报码

厂商原文中的含义

原文含义可能随车型和后缀变化。此处按来源展示,不代表通用诊断结论。

核对适用车辆

车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。

品牌车型年款
NissanPATHFINDER2018

资料覆盖范围 →