MAZDA
04-002-13-2812
厂商技术资料
- 发布日期
- 2013-07-17
- NHTSA 接收日期
- 2017-04-14
- NHTSA 收录编号
- 10097406
厂商摘要
以下为英文原文
SOME VEHICLES (EQUIPPED WITH DSC) MAY EXPERIENCE THE ABS WARNING LIGHT ON WITH DTCS C0020:1C AND U0415:92 STORED IN MEMORY. C0020:71 MAY ALSO BE STORED.
• DTC C0020:1C: ABS MOTOR MONITOR SIGNAL DOES NOT CORRESPOND TO ABS HU/CM ON/OFF SIGNAL.
• DTC U0415:92: ERROR SIGNAL FROM ABS HU/CM OR DSC HU/CM.
• DTC C0020:71: DSC HU/CM MOTOR MONITOR ON SIGNAL IS NOT INPUT WITHIN SPECIFIED TIME LIMIT OR MORE WHEN MOTOR SIGNAL IS SWITCHED FROM ON TO OFF BY DSC HU/CM. THIS CONCERN MAY OCCUR IF THE VEHICLE IS USED IN AN AREA WITH HIGH AMBIENT TEMPERATURES AND HUMIDITY. UNDER THESE CONDITIONS, THE PUMP MOTOR BRUSH IN THE ABS HYDRAULIC UNIT MAY HAVE POOR CONTACT CAUSING THE ABS WARNING LIGHT TO TURN ON. TO CORRECT THE PROBLEM, THE MATERIAL OF THE MOTOR BRUSH HAS BEEN CHANGED.
• DTC C0020:1C: ABS MOTOR MONITOR SIGNAL DOES NOT CORRESPOND TO ABS HU/CM ON/OFF SIGNAL.
• DTC U0415:92: ERROR SIGNAL FROM ABS HU/CM OR DSC HU/CM.
• DTC C0020:71: DSC HU/CM MOTOR MONITOR ON SIGNAL IS NOT INPUT WITHIN SPECIFIED TIME LIMIT OR MORE WHEN MOTOR SIGNAL IS SWITCHED FROM ON TO OFF BY DSC HU/CM. THIS CONCERN MAY OCCUR IF THE VEHICLE IS USED IN AN AREA WITH HIGH AMBIENT TEMPERATURES AND HUMIDITY. UNDER THESE CONDITIONS, THE PUMP MOTOR BRUSH IN THE ABS HYDRAULIC UNIT MAY HAVE POOR CONTACT CAUSING THE ABS WARNING LIGHT TO TURN ON. TO CORRECT THE PROBLEM, THE MATERIAL OF THE MOTOR BRUSH HAS BEEN CHANGED.
原文报码
厂商原文中的含义
原文含义可能随车型和后缀变化。此处按来源展示，不代表通用诊断结论。
Mazda
C0020:1CABS MOTOR MONITOR SIGNAL DOES NOT CORRESPOND TO ABS HU/CM ON/OFF SIGNALMazda
C0020:71DSC HU/CM MOTOR MONITOR ON SIGNAL IS NOT INPUT WITHIN SPECIFIED TIME LIMIT OR MORE WHEN MOTOR SIGNAL IS SWITCHED FROM ON TO OFF BY DSC HU/CMMazda
U0415:92ERROR SIGNAL FROM ABS HU/CM OR DSC HU/CM核对适用车辆
车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。