JEEP
21-008-25
Материалы производителя
- Дата публикации
- 2025-01-11
- Получено NHTSA
- 2025-01-14
- Номера записей NHTSA
- 11012826
Аннотация производителя
Оригинал на английском
"Flash: Transmission Control Module (TCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• P1614-00 - ECU Reset/Recovery Occurred.
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
• P1614-00 - ECU Reset/Recovery Occurred.
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
Коды в оригинале
Формулировка производителя
Формулировки зависят от машины и суффикса, это не универсальный диагноз.
Jeep
P0810-00Clutch Position Control ErrorJeep
P1614-00ECU Reset/Recovery OccurredПроверьте применимость
Связь с автомобилем — отправная точка. Уточняйте двигатель, период выпуска и ПО по данным производителя.
| Марка | Модель | Модельный год |
|---|---|---|
| Jeep | GRAND CHEROKEE | 2024 |
| Jeep | GRAND CHEROKEE L | 2024 |