JEEP
21-041-24 REV. A
Comunicados do fabricante
- Data de publicação
- 2024-10-04
- Recebido pela NHTSA
- 2024-10-08
- Números de registro NHTSA
- 11008751
Resumo do fabricante
Texto original em inglês
"Flash: Transmission Control Module (TCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• **P1614-00 - ECU Reset/Recovery Occurred.**
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• **Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).**
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
• **P1614-00 - ECU Reset/Recovery Occurred.**
• P0810-00 - Clutch Position Control Error. Customers may also comment on one or more of the following:
• **Customer may not continue with rock cycle maneuver due to the wrong message ""Shift To P then Desired Gear"" displayed on the Instrument Panel Cluster (IPC).**
• K0 Adaptation routine runs when vehicle stationary and EV Mode.
• Vehicle loses propulsion capability.
• Service transmission warning indicator is on. NOTE: Requires key cycle to recover. This bulletin involves reprogramming the TCM with the latest available software."
Códigos no documento
Descrição do fabricante
O texto varia por veículo e sufixo; não é diagnóstico universal.
Jeep
P0810-00Clutch Position Control ErrorJeep
P1614-00ECU Reset/Recovery OccurredConfira a aplicação ao veículo
A relação com um veículo é uma pista. Confirme motor, produção e software na documentação do fabricante.
| Marca | Modelo | Ano-modelo |
|---|---|---|
| Jeep | GRAND CHEROKEE | 2024 |