Startseite18-042-26 · JEEP
JEEP

18-042-26

Herstellerinformationen

Veröffentlichung
2026-03-21
Bei NHTSA eingegangen
2026-03-25
NHTSA-Datensatznummern
11030227 · 11030252

Mehrfache Einreichungen desselben Bulletins werden gruppiert; Originalnummern bleiben erhalten.

Herstellerzusammenfassung

Englischer Originaltext

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• **P2AF6-00 - Dual Starter Relay Stuck (in active or stored status).
• P1CEA - Boost Side EVAP Purge System Performance (in active or stored status).
• P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status).
• P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (in active or stored status).
• P0071-00 - Ambient Air Temperature Sensor Performance (in active or stored status).
• P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit (in active or stored status).
• P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (in active or stored status).
• P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (in active or stored status).
• P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (in active or stored status).
• P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (in active or stored status).
• U0673-00 - Lost Communication With Ion Sense Module (in active or stored status).
• P05BD-00 - Stop-Start Mode Switch Range/Performance (in active or stored status).
• P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (in active or stored status).
• P0116-00 - Engine Coolant Temperature Sensor 1 Performance (in active or stored status).
• P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status).
• P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit (in active or stored status).
• P032A-00 - Knock - Combustion Vibration Sensor C Circuit (in active or stored status).
• P062B-00 - Internal Control Module Fuel Injector Control Performance (in active or stored status).
• P018B-00 - Fuel Pressure Sensor "B" Circuit Range/Performance (in active or stored status).
• P00F3-00 - Humidity Sensor Circuit Range - Pe

NHTSA-Herstellerinformationen ↗

Codes im Original

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

JeepP018B-00
Fuel Pressure Sensor "B" Circuit Range/Performance (in active or stored status)

NHTSA 11030227

JeepP032A-00
Knock - Combustion Vibration Sensor C Circuit (in active or stored status)

NHTSA 11030227

JeepP062B-00
Internal Control Module Fuel Injector Control Performance (in active or stored status)

NHTSA 11030227

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
JeepGRAND WAGONEER2024
JeepWAGONEER2024

Datenabdeckung →