Startseite18-018-26 · JEEP
JEEP

18-018-26

Herstellerinformationen

Veröffentlichung
2026-02-11
Bei NHTSA eingegangen
2026-02-19
NHTSA-Datensatznummern
11028880

Herstellerzusammenfassung

Englischer Originaltext

Not applicable to vehicles built for US market. Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC):
• P2002 - Diesel Particulate Filter Flow Resistance Monitoring Too High Level 2 Component Or System Operation Obstructed Or Blocked. Customers may also comment on the following:
• Oil change service light comes on at 15,000km (9,321 Miles). The actual maintenance interval for the Australian market is 20,000km (12,427 Miles).
• "DEF Low Refill Soon" message will appear in the Instrument Panel Cluster (IPC).
• Engine power output is lower than expected when applying the throttle.
• Engine not starting.
• Battery not charging.
• "Engine Oil Temperature High" message in the Instrument Panel Cluster (IPC).
• "Stop/Start Not Ready / Driver Seatbelt Unbuckled" message in the IPC Fig. 1.
• Vehicle will go to limp-in mode and will not go beyond 100 kmh (62 mph) speed.** ,

NHTSA-Herstellerinformationen ↗

Codes im Original

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
JeepCOMPASS2026
JeepCOMPASS2025
JeepCOMPASS2024
JeepCOMPASS2023

Datenabdeckung →