JEEP
18-090-25
Herstellerinformationen
- Veröffentlichung
- 2025-10-04
- Bei NHTSA eingegangen
- 2025-10-08
- NHTSA-Datensatznummern
- 11024062
Herstellerzusammenfassung
Englischer Originaltext
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation.
• P152F - Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. Customers may also comment on one or more of the following:
• Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection with the transfer case in neutral.
• Clutch is overheating.
• Clutch is slipping on engagement.
• Inability to accelerate uphill.
• Vehicle does not start.
• Vehicle is stuck in limp-home mode. This bulletin involves reprogramming the PCM with the latest available software.
• P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation.
• P152F - Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. Customers may also comment on one or more of the following:
• Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection with the transfer case in neutral.
• Clutch is overheating.
• Clutch is slipping on engagement.
• Inability to accelerate uphill.
• Vehicle does not start.
• Vehicle is stuck in limp-home mode. This bulletin involves reprogramming the PCM with the latest available software.
Codes im Original
Wortlaut des Herstellers
Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.
Jeep
P08A6Gear Lever Position Sensor System - Multiple Sensor CorrelationJeep
P152FEngine Hood Switch 2 / Engine Hood Switch 1 CorrelationFahrzeugzuordnung prüfen
Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.
| Marke | Modell | Modelljahr |
|---|---|---|
| Jeep | WRANGLER | 2023 |