JEEP
08-190-24 REV. A
Herstellerinformationen
- Veröffentlichung
- 2024-11-03
- Bei NHTSA eingegangen
- 2024-11-07
- NHTSA-Datensatznummern
- 11010228
Herstellerzusammenfassung
Englischer Originaltext
"Flash: Central ADAS Decision Module (CADM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• C008E - ECU Internal Performance.
• C2203-00 - Current VIN Missing/Mismatch.
• U015C-00 - Lost Communication With Automated Driving System Control Module ""A"". In addition, the customer may comment on one ore more of the following:
• Active Lane Management (ALM) settings do not save and turns ""Off"" between key-cycles.
• Adaptive Cruise Control (ACC) settings do not save between key-cycles. Defaults back to ""4 Bars"".
• ""Automatic Emergency Braking (AEB) Unavailable Service Required"" pop up intermittently on the Instrument Panel Cluster (IPC).
• ""Active Lane Management (ALM) Unavailable Service Required"" warning message appears on the IPC with no active fault codes.
• Blind Spot Monitoring (BSM) Warning Light LED ""flickering"" when activated.
• Traffic Sign Information (TSI) feature Indicator on the IPC ""blinking"" when driving past consecutive speed signs. This bulletin involves reprogramming of the CADM with the latest available software"
• C008E - ECU Internal Performance.
• C2203-00 - Current VIN Missing/Mismatch.
• U015C-00 - Lost Communication With Automated Driving System Control Module ""A"". In addition, the customer may comment on one ore more of the following:
• Active Lane Management (ALM) settings do not save and turns ""Off"" between key-cycles.
• Adaptive Cruise Control (ACC) settings do not save between key-cycles. Defaults back to ""4 Bars"".
• ""Automatic Emergency Braking (AEB) Unavailable Service Required"" pop up intermittently on the Instrument Panel Cluster (IPC).
• ""Active Lane Management (ALM) Unavailable Service Required"" warning message appears on the IPC with no active fault codes.
• Blind Spot Monitoring (BSM) Warning Light LED ""flickering"" when activated.
• Traffic Sign Information (TSI) feature Indicator on the IPC ""blinking"" when driving past consecutive speed signs. This bulletin involves reprogramming of the CADM with the latest available software"
Codes im Original
Wortlaut des Herstellers
Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.
Jeep
C008EECU Internal PerformanceJeep
C2203-00Current VIN Missing/MismatchJeep
U015C-00Lost Communication With Automated Driving System Control Module ""A""Fahrzeugzuordnung prüfen
Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.
| Marke | Modell | Modelljahr |
|---|---|---|
| Jeep | GRAND WAGONEER | 2024 |
| Jeep | WAGONEER | 2024 |