Startseite18-080-24 · JEEP
JEEP

18-080-24

Herstellerinformationen

Veröffentlichung
2024-10-23
Bei NHTSA eingegangen
2024-10-30
NHTSA-Datensatznummern
11009475

Herstellerzusammenfassung

Englischer Originaltext

"Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) has been set:
• P0629 - Fuel Pump Control Circuit High.
• P0171 - Fuel system Lean.
• P0087 - Fuel Rail Pressure Too Low - Bank 1. Customers may experience one or more of the following:
• Vehicle will not start.
• The Instrument Cluster Panel (ICP) unable to calculate the instantaneous fuel economy under heavy acceleration.
• The oxygen sensor can give incorrect values when entering EV mode. False fault detection (MIL on) is possible when this event occurs.
• The rear half shafts are damaged due to accelerating in drive with the Electronic Parking Brake (EPB) applied This bulletin involves reprogramming the PCM with the latest available software."

NHTSA-Herstellerinformationen ↗

Codes im Original

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
JeepGRAND CHEROKEE2022

Datenabdeckung →