RAM
21-051-24
Herstellerinformationen
- Veröffentlichung
- 2024-09-27
- Bei NHTSA eingegangen
- 2024-10-01
- NHTSA-Datensatznummern
- 11008221
Herstellerzusammenfassung
Englischer Originaltext
"Replace K1 Clutch / Input Shaft Assembly Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC):
• P0731-00 - Gear 1 Shift Incorrect Ratio (This DTC will set during a key cycle and shifting into Drive). Customers may also comment on the following:
• The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available. **This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly. These repairs are to be performed only if the vehicle is inoperable due to K1 clutch failure. ** "
• P0731-00 - Gear 1 Shift Incorrect Ratio (This DTC will set during a key cycle and shifting into Drive). Customers may also comment on the following:
• The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available. **This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly. These repairs are to be performed only if the vehicle is inoperable due to K1 clutch failure. ** "
Codes im Original
Wortlaut des Herstellers
Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.
Ram
P0731-00Gear 1 Shift Incorrect Ratio (ThisFahrzeugzuordnung prüfen
Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.