StartseiteNTB16045 · NISSAN
NISSAN

NTB16045

Herstellerinformationen

Veröffentlichung
2016-04-21
Bei NHTSA eingegangen
2021-05-10
NHTSA-Datensatznummern
10192810

Herstellerzusammenfassung

Englischer Originaltext

SERVICE INFORMATION IMPORTANT: If you confirm one or more of the following transmission DTCs are stored: P0729: 6GR Incorrect Ratio P0730: Incorrect Gear Ratio P0731: 1GR Incorrect Ratio P0732: 2GR Incorrect Ratio P0733: 3GR Incorrect Ratio P0734: 4GR Incorrect Ratio P0735: 5GR Incorrect Ratio P1734: 7GR Incorrect Ratio Before performing any transmission repairs: 1. Check all of the engine intake air ducting and make sure: - It is connected securely and correctly at the throttle body and all other connections. See Figures 1 and 2 on the page 2. - All clamps and connectors are secure and tight. - There are no leaks. 2. Perform DTC confirmation procedure to confirm the incident. - Refer to the Electronic Service Manual (ESM) for DTC confirmation procedures. See this bulletin for further detail.

NHTSA-Herstellerinformationen ↗

Codes im Original

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

NissanP1734
7GR Incorrect Ratio Before performing any transmission repairs: 1

NHTSA 10192810

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
NissanTITAN2017
NissanTITAN XD2016

Datenabdeckung →