StartseiteNTB18-077 · NISSAN
NISSAN

NTB18-077

Herstellerinformationen

Veröffentlichung
2018-11-08
Bei NHTSA eingegangen
2019-01-07
NHTSA-Datensatznummern
10152521

Herstellerzusammenfassung

Englischer Originaltext

MIL ON WITH DTC P0776, P1715 AND MAY HAVE HESITATION AND/OR LACK OF POWER This bulletin applies only to vehicles equipped with a CVT (Continuously Variable Transmission). IF YOU CONFIRM The MIL is ON with DTC P0776 (PC SOLENOID B ? Pressure Control Solenoid ?B? Performance/Stuck OFF) stored. NOTE: - If P0744, P0746, P0841, P0965, P2813, or P17F0 are stored this bulletin does not apply. Refer to ASIST for diagnostic assistance. - With this incident, if it should occur, P1715 (INPUT SPEED SENSOR) may be stored with DTC P0776. The vehicle may also hesitate and/or have reduced power. ACTION 1. Refer to the Repair Flow Chart on page 2 for mechanical CVT repair. 2. If needed, reprogram the TCM. - Refer to step 30 in the TCM Reprogram section (page 21) of the SERVICE PROCEDURE to confirm if reprogramming is needed. 3. Perform Additional Service (page 19).

NHTSA-Herstellerinformationen ↗

Codes im Original

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
NissanNV200 TAXI2017
NissanNV200 TAXI2016
NissanNV200 TAXI2015
NissanNV200 TAXI2014
NissanREDUNDANT NV2002018
NissanREDUNDANT NV2002017
NissanREDUNDANT NV2002016
NissanREDUNDANT NV2002015
NissanROGUE2018
NissanROGUE2017
NissanSENTRA2018
NissanSENTRA2017

Datenabdeckung →