What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
U101100supply voltage too lowManufacturer communications
13Original wording in English
FORD
Reported code forms U1011
This article supersedes TSB 21-2245 to update labor times from M-time to AP-time and add a cap. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * "Stop…
AUDI
Reported code forms U101100
This TSB provides information when the 12V battery is discharged/drive system not activated/keyless opening is inoperatble; DTCs U101100, B1802F1, U140A00, U140000, B10CD00.
AUDI
Reported code forms U101100
This TSB provides information when the 12V battery is discharged/drive system not activated/keyless opening is inoperatble; DTCs U101100, B1802F1, U140A00, U140000, B10CD00.
BENTLEY
Reported code forms U101100
Customer statement: Drivers Information panel (DIP) goes blank -Once blank no information is visible within the DIP -No error messages are shown within the DIP Workshop findings: DTC U101100 evident within address 09 -…
FORD
Reported code forms U1011
Some 2021 Mustang Mach-E vehicles built on or before 20-Mar-2021 may exhibit a loss of power, Stop Safely Now message in the instrument panel cluster (IPC), and illuminated malfunction indicator lamp (MIL) with…
AUDI
Reported code forms U101100
Vehicle does not start, battery flat DTC stored (DTC U101100)
Check vehicle applicability
74A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A4 | 2013 |
| Audi | A4 | 2010 |
| Audi | A4 | 2009 |
| Audi | A4 ALLROAD | 2014 |
| Audi | A4 ALLROAD | 2013 |
| Audi | A4 AVANT | 2012 |
| Audi | A4 AVANT | 2011 |
| Audi | A5 | 2014 |
| Audi | A5 | 2013 |
| Audi | A5 | 2012 |
| Audi | A5 | 2011 |
| Audi | A5 | 2010 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.