HomeU0115 · Manufacturer communications

U0115 · Manufacturer communications

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

U0115 →

09-027-26

MAZDA

Reported code forms U0115

DESCRIPTION Some CX-70 and CX-90 PHEV vehicles may fail to start (enter READY mode) in cold weather, but the vehicle can often be started successfully on the next attempt. This may occur when leakage current between…

Read communication ↗

MERCEDES-BENZ

Reported code forms U011500

Complaint 243: Red 12V battery message, white HV warning message, warning message in the IC and if applicable for vehicles with BMS30EB02 yellow HV drive system 465: Red 12V battery message, white HV warning message,…

Read communication ↗

MERCEDES-BENZ

Reported code forms U011500

Complaint 243: Red 12V battery message, white HV warning message, warning message in the IC and if applicable for vehicles with BMS30EB02 yellow HV drive system 465: Red 12V battery message, white HV warning message,…

Read communication ↗

MERCEDES-BENZ

Reported code forms U011500

Complaint 243: Red 12V battery message, white HV warning message, warning message in the IC and if applicable for vehicles with BMS30EB02 yellow HV drive system 465: Red 12V battery message, white HV warning message,…

Read communication ↗

MERCEDES-BENZ

Reported code forms U011500

Complaint: 243: Red 12V battery message, white HV warning message, warning message in the IC ​​and if applicable for vehicles with BMS30EB02 yellow HV drive system 465: Red 12V battery message, white HV warning message,…

Read communication ↗

MERCEDES-BENZ

Reported code forms U011500

Complaint: 243: Red 12V battery message, white HV warning message, warning message in the IC ​​and if applicable for vehicles with BMS30EB02 yellow HV drive system 465: Red 12V battery message, white HV warning message,…

Read communication ↗

MERCEDES-BENZ, MERCEDES-MAYBACH

Reported code forms U0115

Complaint Check engine light illuminates. No driveability complaint. Fault codes U0115 and U0168 stored in ISA control unit Cause ISA control unit software Remedy Clear fault codes and perform a test drive. If fault…

Read communication ↗

TSB-E09087

CUMMINS

Reported code forms U0115

CUMMINS: REMOVING POWER FROM TRANSMISSION CONTROLLER BEFORE CALIBRATING ECM ON GROVE CRANE VEHICLES. THIS ON ENGINES IN AUTOCAR CHASSIS, SPECIFICALLY UNITS THAT MAKE USE OF A MULTIPLEXED THROTTLE, SUCH AS SOME GROVE…

Read communication ↗