What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
7Original wording in English
VOLKSWAGEN
Reported code forms P310B
If you have a complaint of DTCs for the low side fuel pressure being out of specification (e.g. P310B), check the fuel pressure with BOTH a mechanical gauge and by the display in Measured Value Block 103. The readings…
VOLKSWAGEN
Reported code forms P310B
Tech Tips (2.0L FSI (BPY) Engines - Low Fuel Pressure DTCs (P310B)): This document informs on how to check fuel pressure If you have a complaint of DTCs for the low side fuel pressure being out of specification
VOLKSWAGEN
Reported code forms P310B
VOLKSWAGEN: MIL ON DTCS P310B, P129F, P008B, P129E, P008A, P2540 OR P0087 STORED IN ECM FAULT MEMORY. MIL ON AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY. *JS
VOLKSWAGEN
Reported code forms P310B
VOLKSWAGEN: FUEL PRESSURE SENSOR REPLACEMENT (SAGA CODE 24M5/05). MIL ON AND DTC P310B AND/OR P129F STORED IN THE ECM FAULT MEMORY. A MALFUCTION OF FUEL PRESSURE SENSOR-G410 (LOW PRESSURE SIDE) MAY CAUSE AN INCORRECT…
VOLKSWAGEN
Reported code forms P310B
VOLKSWAGEN: MIL ON, DTC P129F AND/OR P310B STORED IN ECM FAULT MEMORY. DUE TO FUEL INTRUSION INTO THE LOW PRESSURE SIDE FUEL PRESSURE SENSOR-G410, A FALSE SIGNAL MAY BE SENT TO THE ECM RESULTING IN A READING THAT IS OUT…
VOLKSWAGEN
Reported code forms P310B
MIL ON, DTC P129F AND/OR P310B STORED IN ECM FAULT MEMORY. *NJ
Check vehicle applicability
1A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Volkswagen | EOS | 2007 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.