What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P310BLOW PRESSURE FUEL SYSTEM REGULATION, FUEL PRESSURE OUTSIDE TOLERANCEManufacturer communications
9Original wording in English
AUDI
Reported code forms P310B00
This bulletin contains repair instructions for when DTC P310B00 is stored and the engine does not start or intermittently does not start.
AUDI
Reported code forms P310B00
This bulletin contains repair instructions for when DTC P310B00 is stored and the engine does not start or intermittently does not start.
AUDI
Reported code forms P310B00
This bulletin contains repair instructions for when DTC P310B00 is stored and the engine does not start or intermittently does not start.
AUDI
Reported code forms P310B
Supersedes Technical Service Bulletin Group 20 number 14-36 dated August 14, 2014. MIL on.DTC P310B is stored in the engine control module, J623 (address word 01), with symptom code 6183.
AUDI
Reported code forms P310B
AUDI: MIL ON AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY-P310B (LOW PRESSURE FUEL SYSTEM REGULATION, FUEL PRESSURE OUTSIDE TOLERANCE); P129F OR P008B (LOW PRESSURE FUEL SYSTEM, PRESSURE TOO…
AUDI
Reported code forms P310B
AUDI: MIL ON AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED INTHE ECM DATA MEMORY-P310B (LOW PRESSURE FUEL SYSTEM REGULATION, FUEL PRESSURE OUTSIDE TOLERANCE); P129F OR P008B (LOW PRESSURE FUEL SYSTEM, PRESSURE TOO…
Check vehicle applicability
10A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.