What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
5Original wording in English
FORD
Reported code forms P2C90
This bulletin supersedes 26-2091. Reason for update: To update the production cutoff date for Transit vehicles. Some of the vehicles listed in the Model statement above may exhibit an illuminated MIL with DTC P2C90…
FORD
Reported code forms P2C90
This bulletin supersedes 26-2045. Reason for update: update the labor operation allowances and the service procedure to include the required modules to program for F-150 Powerboost variant. Some of the vehicles listed…
FORD
Reported code forms P2C90
This bulletin supersedes 24-2405. Reason for update: update the vehicle model coverage to include 2026 Transit vehicles, remove the Parts List and update the Service procedure to perform the PCV system repair outside of…
FORD
Reported code forms P2C90
Some 2024 F-150 vehicles built on or before 14-May-2024 equipped with a 3.5L PowerBoost engine and 2024 F-150 vehicles equipped with a 3.5L EcoBoost or 5.2L engine may exhibit an illuminated MIL with DTC P2C90 stored in…
FORD
Reported code forms P2C90
Some 2024 F-150 vehicles built on or before 14-May-2024 equipped with a 3.5L PowerBoost may exhibit an illuminated MIL with DTC P2C90 stored in the powertrain control module (PCM). To correct this condition, perform the…
Check vehicle applicability
1A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Ford | F-150 | 2024 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.