What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
2Original wording in English
FORD
Reported code forms P2805
Some 2020-2021 F-Super Duty vehicles equipped with an 10R140 automatic transmission may exhibit an illuminated malfunction indicator Lamp (MIL) and/or powertrain malfunction indicator (wrench) lamp with various…
AUDI
Reported code forms P280500
This bulletin contains repair instructions for when DTC P280500 is stored in the TCM with symptom code 20779. The engine does not start and a gearbox malfunction message is displayed.
Check vehicle applicability
10A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.