What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P2583-76Temporary stop of Integrated Driver Support System [Misalignment Millimeter Wave Radar]Manufacturer communications
2Original wording in English
HONDA
Reported code forms P2583-76
Service Bulletin - The ACC system error message comes on while driving when outside temperatures are low/near freezing due to snow and ice getting stuck to the front of the millimeter wave radar. This can cause DTC…
HONDA
Reported code forms P2583-76
Servicenews article - If you're having trouble aligning the front millimeter wave radar, or if DTC P2583-76 is present and does not clear after re-aiming, inspect the radar mounting clips and bracket. Check that the…
Check vehicle applicability
3A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.