What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P2404Evap System Leak Detection Pump Sense Circuit Range/PerformanceP2404EVAP System Leak Detection Pump Sense Circuit Range/PerformanceP2404Evap System Leak Detection Pump Sensor Circuit Range/PerformanceP2404RATIONALITY CHECK: REED SENSOR UNABLE TO OPENManufacturer communications
30Original wording in English
SUBARU
Reported code forms P2404
This bulletin the announces diagnostic procedures and availability of new Engine Control Module (ECM) reprogramming files to address DTC P2404 (Evap System Leak Detection Pump Sense Circuit Range/Performance) detection.
SUBARU
Reported code forms P2404
This bulletin announces the diagnostic procedures and availability of reprograming files to rectify the following Diagnostic Trouble Codes (DTCs). • P2404: EVAP System Leak Detection Pump Sense Circuit…
SUBARU
Reported code forms P2404
This bulletin announces the diagnostic procedures and availability of reprograming files to rectify the following Diagnostic Trouble Codes (DTCs). The ELCM may accumulate condensation causing the inaccurate detection of…
SUBARU
Reported code forms P2404
"This bulletin announces the diagnostic procedures and availability of reprograming files to rectify the following Diagnostic Trouble Codes (DTCs). • P2404: EVAP System Leak Detection Pump Sense Circuit…
SUBARU
Reported code forms P2404
This bulletin the announces diagnostic procedures and availability of new Engine Control Module (ECM) reprogramming files to address DTC P2404 (Evap System Leak Detection Pump Sense Circuit Range/Performance) detection.
SUBARU
Reported code forms P2404
This bulletin the announces diagnostic procedures and availability of new Engine Control Module (ECM) reprogramming files to address DTC P2404 (Evap System Leak Detection Pump Sense Circuit Range/Performance) detection.
Check vehicle applicability
102A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A4 | 2006 |
| Audi | A4 | 2005 |
| Jaguar | XJ | 2015 |
| Jaguar | XJ | 2014 |
| Jaguar | XJ | 2013 |
| Jaguar | XJ | 2012 |
| Jaguar | XJ | 2011 |
| Jaguar | XJ | 2010 |
| Land Rover | LR4 | 2014 |
| Land Rover | LR4 | 2013 |
| Land Rover | LR4 | 2012 |
| Land Rover | LR4 | 2011 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.