HomeP2097 · Code meaning and manufacturer information
Powertrain

P2097

Code meaning and manufacturer information

P2097

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

Clear filters

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

Manufacturer communications

3

Original wording in English

NTB19-030

NISSAN

Reported code forms P2097

2016-2018 NISSAN; MIL ON WITH DTC P0171, P0174, P2097, AND/OR P2099 This bulletin applies to Altima vehicles equipped with VQ35 engine only. IF YOU CONFIRM The MIL is ON with one or more of the following Air/Fuel (A/F)…

Read communication ↗

NTB15115

NISSAN

Reported code forms P2097

IF YOU CONFIRM: There are no drivability issues. and The MIL is ON with one or more of the following Air Fuel (A/F) Sensor DTCs stored: - P0171 - FUEL SYS-LEAN-B1 (System too lean bank 1) - P0172 - FUEL SYS-RICH-B1…

Read communication ↗

NTB12085B

NISSAN

Reported code forms P2097

IF YOU CONFIRM: The MIL is "ON" with one or more of the following DTCs stored - P0130, P014C, P014D, P2097 ACTION: 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are…

Read communication ↗

Check vehicle applicability

5

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
NissanALTIMA2018
NissanALTIMA2017
NissanALTIMA2016
NissanALTIMA2015
NissanALTIMA2013

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.