What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P2096:00Air fuel too leanManufacturer communications
7Original wording in English
MAZDA
Reported code forms P2096:00
Some vehicles may experience the check engine light on with DTCs P2096:00, P2097:00 and/or P0524:00 that cannot be cleared by itself, and the check engine light stays on even if the detection condition has gone.à ̄‚·…
MAZDA
Reported code forms P2096:00
Some customers may experience a check engine light illuminating with DTC P2096:00 stored in PCM memory. DTC P2096:00 - Air fuel too lean. NOTE: This concern occurs only on vehicles with PCMs manufactured by MITSUBISHI.…
MAZDA
Reported code forms P2096:00
Some customers may experience a check engine light illuminating with DTC P2096:00 stored in PCM memory. DTC P2096:00 - Air fuel too lean. NOTE: This concern occurs only on vehicles with PCMs manufactured by Mitsubishi.…
MAZDA
Reported code forms P2096
If you encounter a 2018 CX-5 (cylinder deactivation) with DTC P2096, contact Hotline for instructions.
MAZDA
Reported code forms P2096
If the vehicle has a Check Engine Light ON with DTC P2096 stored, update the PCM calibration with IDS version 99.01 or higher.
MAZDA
Reported code forms P2096
IF THE VEHICLE HAS A CHECK ENGINE LIGHT ON WITH DTC P2096 STORED, UPDATE THE PCM CALIBRATION WITH IDS VERSION 99.01 OR HIGHER.
Check vehicle applicability
3A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.