What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P1682Battery Draw - No StartP1682Ignition 1 Switch Circuit 2P1682Battery Draw - No StartP1682ECM CALIBRATION PENDINGView all · Manufacturer wording →
Manufacturer communications
31Original wording in English
CHEVROLET, GMC
Reported code forms P1682
This technical bulletin provides repair information to correct a customer concern of DTC P0101 Mass Air Flow (MAF) Sensor Performance, P1682 Set after MAF Replacement.
CADILLAC, CHEVROLET, GMC
Reported code forms P1682
This Preliminary information communicates Some customers may comment that the SES lamp is illuminated or was Illuminated and turned off. During inspection Technician may notice DTC P1682 (Ignition 1 Switch Circuit 2)…
CHEVROLET, GMC
Reported code forms P1682
This Preliminary information communicates that water leaking into the headlamp assembly or headlamp assembly connections can cause an electrical short which will keep modules from shutting down causing a dead battery…
BUICK, CHEVROLET, GMC
Reported code forms P1682
This technical bulletin provides repair information to correct a customer concern of potential reduced engine power message displayed and/or engine stall with DTCs P1682 and/or P0689 Set.
CHEVROLET, GMC
Reported code forms P1682
This Preliminary information communicates that water leaking into the headlamp assembly or headlamp assembly connections can cause an electrical short which will keep modules from shutting down causing a dead battery…
CHEVROLET, GMC
Reported code forms P1682
This Preliminary information communicates that water leaking into the headlamp assembly or headlamp assembly connections can cause an electrical short which will keep modules from shutting down causing a dead battery…
Check vehicle applicability
121A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Buick | ENCLAVE | 2017 |
| Buick | ENCLAVE | 2016 |
| Buick | ENCLAVE | 2015 |
| Buick | ENCLAVE | 2014 |
| Buick | ENCLAVE | 2013 |
| Buick | ENCLAVE | 2012 |
| Buick | ENCLAVE | 2011 |
| Buick | ENCLAVE | 2010 |
| Buick | ENCLAVE | 2009 |
| Buick | ENCLAVE | 2008 |
| Buick | LUCERNE | 2007 |
| Buick | LUCERNE | 2006 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.