What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P1411Cylinder 1 Reactivation Control PerformanceManufacturer communications
6Original wording in English
RAM
Reported code forms P1411
"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ●…
AUDI
Reported code forms P1411
MIL ON (DTC'S P0300, P0411, P1128, P1130, P1411, P1423). THIS COULD BE CAUSED BY A CRACKED OR BROKEN VACUUM HOSE. *KB
VOLKSWAGEN
Reported code forms P1411
MALFUNCTION INDICATOR LAMP (MIL) IS ON, DIAGNOSTIC TROUBLE CODES (DTCS) P1411, P1423, SECONDARY AIR INJECTION SYSTEM BANK 1, BANK 2, FLOW TOO LOW ARE STORED IN DTC MEMORY. *TT
PORSCHE
Reported code forms P1411
REPLACEMENT SHEETS (SUPPLEMENT) FOR OBD II MANUAL (OBD II) / DME 7.8: FAULT CODES P0410/P0491/P0492/P1411. *TT
AUDI
Reported code forms P1411
MALFUNCTION INDICATOR LIGHT ON, DIAGNOSTIC TROUBLE CODES (DTC) P0300, P0411, P1128, P1411, P1423 STORED IN DTC MEMORY. A8, S8, A6 QUATTROS. *TT
FORD
Reported code forms P1411
ON SOME VEHICLES, THE MALFUNCTION INDICATOR LAMP (MIL) MAY ILLUMINATE AND CODE P1411 MAY BE STORED IN MEMORY. *TT
Check vehicle applicability
16A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A6 | 2002 |
| Audi | A6 | 2001 |
| Audi | A8 | 2002 |
| Audi | A8 | 2001 |
| Audi | A8 | 2000 |
| Audi | QUATTRO | 2002 |
| Audi | QUATTRO | 2001 |
| Audi | QUATTRO | 2000 |
| Ford | ECONOLINE | 1996 |
| Ford | F SUPER DUTY | 1996 |
| Ford | F-250 | 1996 |
| Ford | F-350 | 1996 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.