What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P1336 -00Combustion misfiring (impact on catalytic converter) : Cylinder undeterminedP1336-00Multiple Cylinder MisfireManufacturer communications
9Original wording in English
JEEP
Reported code forms P1336-00
Not applicable to vehicles built for US market. Fuel Injector Leak Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following…
JEEP
Reported code forms P1336 -00
Not applicable to vehicles built for US market. Spark Plug Melting Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic…
AUDI
Reported code forms P133600
This bulletin contains repair instructions for when DTC P133600 appears in ECM 1 and ECM2.
FORD
Reported code forms P1336
Some 2012-2014 Focus vehicles equipped with a 2.0L gasoline direct injection (GDI) engine may exhibit concerns of engine runs rough, crank no-start, loss of power, loss of engine RPM, and/or illuminated MIL with…
FORD
Reported code forms P1336
Some 2017 E-Series vehicles with 6.8L engine may exhibit an illuminated MIL with multiple DTCs such as P1336 and/or P0339. This may be due to wire chafe near the air conditioning (A/C) compressor due to an unsecured…
FORD, MERCURY
Reported code forms P1336
INCORRECTLY INSTALLED GEAR DRIVEN CAMSHAFT POSITION (CMP) SENSOR SYNCHRONIZER ASSEMBLIES CAUSING SURGE, LOST OF POWER, MALFUNCTION INDICATOR LAMP ON AND DIAGNOSTIC TROUBLE CODES P1336, P1309 AND P0340. *TT
Check vehicle applicability
108A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | R8 SPYDER | 2017 |
| Chevrolet | S SERIES | 1998 |
| Ford | AEROSTAR | 1997 |
| Ford | AEROSTAR | 1996 |
| Ford | AEROSTAR | 1995 |
| Ford | E SERIES | 2003 |
| Ford | E SERIES | 2002 |
| Ford | E SERIES | 2001 |
| Ford | E SERIES | 2000 |
| Ford | E SERIES | 1999 |
| Ford | E SERIES | 1998 |
| Ford | E SERIES | 1997 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.