What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P1326Knock Signal Range/PerformanceP1326Engine Bearing Inspection/Engine Replacement) or the latest versionManufacturer communications
119Original wording in English
HYUNDAI
Reported code forms P132600
Some Tucson (TL) vehicles equipped with a 2.0L engine may exhibit a continued DTC P132600 after an ECM logic update has been performed per TSB 24-01-068H, Engine Monitoring Logic (Service Campaign 966). This bulletin…
HYUNDAI
Reported code forms P1326
This TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H-2 (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the…
HYUNDAI
Reported code forms P1326
This TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the latest…
KIA
Reported code forms P1326
TECHNICAL SERVICE BULLETIN: SUBSEQUENT REPAIR ACTION: ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (SC291YZ) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are…
KIA
Reported code forms P1326
This bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below return to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal…
HYUNDAI
Reported code forms P1326
Certain Elantra N (CN7 N), Kona N (OS N), and Veloster N (JS N) vehicles may have DTC P1326 set due to water intrusion in the knock sensor connector during heavy rain or car wash conditions. There is no abnormal engine…
Check vehicle applicability
130A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Hyundai | ELANTRA | 2016 |
| Hyundai | ELANTRA | 2015 |
| Hyundai | ELANTRA | 2014 |
| Hyundai | ELANTRA COUPE | 2014 |
| Hyundai | ELANTRA GT | 2020 |
| Hyundai | ELANTRA GT | 2019 |
| Hyundai | ELANTRA GT | 2018 |
| Hyundai | ELANTRA GT | 2017 |
| Hyundai | ELANTRA GT | 2016 |
| Hyundai | ELANTRA GT | 2015 |
| Hyundai | ELANTRA GT | 2014 |
| Hyundai | ELANTRA N | 2024 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.