P1150

Severity: Medium

Lack Of HO2S21 Switch – Adaptive Fuel At Limit

Last updated: July 2026

System

Powertrain

Subsystem

Fuel & Air Metering

Code Type

Manufacturer-specific

What does P1150 mean?

P1150 is a manufacturer-specific powertrain diagnostic trouble code. It is defined as "Lack Of HO2S21 Switch – Adaptive Fuel At Limit". It falls under the fuel & air metering area of the vehicle’s powertrain system, and its exact meaning can vary between manufacturers.

When is P1150 set?

The onboard diagnostic system sets P1150 when it detects a condition matching "lack of ho2s21 switch – adaptive fuel at limit" in the fuel & air metering circuit or system. When the fault is confirmed, the module stores the code and, in most cases, turns on a warning light.

This code is generally moderate. The vehicle is often still drivable, but the underlying fault should be diagnosed before it leads to further problems.

Common symptoms

Check engine light (MIL) illuminated
Rough running, hesitation or loss of power
Increased fuel consumption
Difficulty starting or stalling

Possible causes

A failing or contaminated sensor in the affected circuit
Wiring, connector or ground problems
Vacuum, intake or exhaust leaks
A worn or failing mechanical component
Occasionally, a fault in the control module itself

What to check first

Scan for all stored and pending codes and note the freeze-frame data
Inspect the wiring and connectors for the affected circuit
Check for related leaks, loose components or obvious damage
Test the relevant sensor and its reference/ground with a meter
Clear the code and retest to see whether it returns

Frequently asked questions

What does the P1150 code mean?

P1150 means "Lack Of HO2S21 Switch – Adaptive Fuel At Limit". It is a manufacturer-specific powertrain trouble code in the fuel & air metering area.

Is it safe to drive with a P1150 code?

The vehicle is often still drivable with this code, but you should have it diagnosed soon so a moderate fault does not turn into a larger one.

How do I fix a P1150 code?

There is no single fix. Start by confirming the code with a scan tool, then work through the likely causes and checks above — inspecting wiring, connectors and the relevant components before replacing any parts. On your specific make, confirm the diagnosis before repairs.

Can I clear the P1150 code myself?

You can clear the code with an OBD-II scan tool, but if the underlying fault is still present it will usually return. Clearing without repair is only useful to confirm whether the fault is active.

Related codes

P1151

Lack Of HO2S21 Switch – Sensor Indicates Lean

P1152

Lack Of HO2S21 Switch – Sensor Indicates Rich

P1153

Bank 2 Fuel Control Shifted Lean

P1154

Bank 2 Fuel Control Shifted Rich

Important

This information is provided for general reference only. It is not repair advice and may not apply to every make or model. Manufacturer-specific codes can differ. Always confirm a diagnosis with a scan tool and, where needed, a qualified technician before replacing parts.