HomeP0DA8 · Code meaning and manufacturer information
Powertrain

P0DA8

Code meaning and manufacturer information

P0DA8

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

Manufacturer communications

8

Original wording in English

TSB 22-2178

FORD

Reported code forms P0DA8

Some 2021-2022 Mustang Mach-E vehicles built on or before 28-May-2022 may exhibit an illuminated malfunction indicator lamp (MIL) and/or display a Stop Safely Now message in the instrument panel cluster (IPC) with…

Read communication ↗

B20-021

ACURA

Reported code forms P0DA8

"Service Bulletin - The motor power inverter (MPI), also known as the intelligent inverter unit (IIU), may fail over time due to a defective solder joint. This failure may result in one or more of the following DTC(s):…

Read communication ↗

A20-030

HONDA

Reported code forms P0DA8

"Service Bulletin - The Motor Power Inverter (MPI), also known as the Intelligent Inverter Unit (IIU), may fail over time due to a defective solder joint. This failure may result in one or more of the following DTC(s):…

Read communication ↗

A15-057

HONDA

Reported code forms P0DA8

Service bulletin - The cell voltage sensor may incorrectly interpret electrical noise from the inverter and motor circuits as a problem and cause the vehicle to switch to a fail-safe EV mode. Additionally, DTCs P0B3B,…

Read communication ↗

A15-057

HONDA

Reported code forms P0DA8

SERVICE BULLETIN - THE CELL VOLTAGE SENSOR MAY INCORRECTLY INTERPRET ELECTRICAL NOISE FROM THE INVERTER AND MOTOR CIRCUITS AS A PROBLEM AND CAUSE THE VEHICLE TO SWITCH TO A FAIL-SAFE EV MODE. ADDITIONALLY, DTCS P0B3B,…

Read communication ↗

A15-057

HONDA

Reported code forms P0DA8

SERVICE BULLETIN - THE CELL VOLTAGE SENSOR MAY INCORRECTLY INTERPRET ELECTRICAL NOISE FROM THE INVERTER AND MOTOR CIRCUITS AS A PROBLEM AND CAUSE THE VEHICLE TO SWITCH TO A FAIL-SAFE EV MODE. ADDITIONALLY, DTCS P0B3B,…

Read communication ↗

View all →

Check vehicle applicability

9

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
AcuraILX HYBRID2013
FordMUSTANG MACH E2022
FordMUSTANG MACH E2021
HondaACCORD HYBRID2015
HondaACCORD HYBRID2014
HondaCIVIC HYBRID2015
HondaCIVIC HYBRID2014
HondaCIVIC HYBRID2013
HondaCIVIC HYBRID2012

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.