P0845

Severity: Low

Transmission Fluid Pressure Sensor/Switch B Circuit

Last updated: July 2026

System

Powertrain

Subsystem

Transmission

Code Type

Generic (SAE)

What does P0845 mean?

P0845 is a generic (SAE) powertrain diagnostic trouble code. It is defined as "Transmission Fluid Pressure Sensor/Switch B Circuit". It falls under the transmission area of the vehicle’s powertrain system, and has the same core meaning across most makes and models.

When is P0845 set?

The onboard diagnostic system sets P0845 when it detects a condition matching "transmission fluid pressure sensor/switch b circuit" in the transmission circuit or system. When the fault is confirmed, the module stores the code and, in most cases, turns on a warning light.

This code is generally minor and often relates to a signal, range or performance condition. It should still be inspected, especially if it returns after clearing.

Common symptoms

Check engine light (MIL) illuminated
Rough running, hesitation or loss of power
Increased fuel consumption
Difficulty starting or stalling

Possible causes

A failing or contaminated sensor in the affected circuit
Wiring, connector or ground problems
Vacuum, intake or exhaust leaks
A worn or failing mechanical component
Occasionally, a fault in the control module itself

What to check first

Scan for all stored and pending codes and note the freeze-frame data
Inspect the wiring and connectors for the affected circuit
Check for related leaks, loose components or obvious damage
Test the relevant sensor and its reference/ground with a meter
Clear the code and retest to see whether it returns

Frequently asked questions

What does the P0845 code mean?

P0845 means "Transmission Fluid Pressure Sensor/Switch B Circuit". It is a generic powertrain trouble code in the transmission area.

Is it safe to drive with a P0845 code?

This code is usually minor, and short-distance driving is often possible, but you should still have it checked — especially if the warning light stays on or the code returns.

How do I fix a P0845 code?

There is no single fix. Start by confirming the code with a scan tool, then work through the likely causes and checks above — inspecting wiring, connectors and the relevant components before replacing any parts. On most vehicles, confirm the diagnosis before repairs.

Can I clear the P0845 code myself?

You can clear the code with an OBD-II scan tool, but if the underlying fault is still present it will usually return. Clearing without repair is only useful to confirm whether the fault is active.

Related codes

P0846

Transmission Fluid Pressure Sensor/Switch B Circuit Range/Performance

P0847

Transmission Fluid Pressure Sensor/Switch B Circuit Low

P0844

Transmission Fluid Pressure Sensor/Switch A Circuit Intermittent

P0848

Transmission Fluid Pressure Sensor/Switch B Circuit High

Important

This information is provided for general reference only. It is not repair advice and may not apply to every make or model. Manufacturer-specific codes can differ. Always confirm a diagnosis with a scan tool and, where needed, a qualified technician before replacing parts.