What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0716input shaft [mainshaft] speed sensor [range/performance]Manufacturer communications
7Original wording in English
ACURA
Reported code forms P0716
Service Bulletin - During a downshift from 9th or 8th gear to 7th gear or lower, a miscalculation in the TCM software causes the MIL to come on with DTC P0716 (input shaft [mainshaft] speed sensor [range/performance]).
ACURA
Reported code forms P0716
Service Bulletin - During a downshift from 9th or 8th gear to 7th gear or lower, a miscalculation in the TCM software causes the MIL to come on with DTC P0716 (input shaft [mainshaft] speed sensor [range/performance]).
ACURA
Reported code forms P0716
Service Bulletin - Due to a running change at the start of production for model year 2019 MDX, the MIL coming on with DTC P0716 does not apply and was removed throughout this service bulletin.
ACURA
Reported code forms P0716
Service Bulletin - The transmission has intermittent harsh or jerky upshifts with steady acceleration, or the MIL comes on with DTC P0716 (VNM Performance).
ACURA
Reported code forms P0716
Service Bulletin - During a downshift from 9th or 8th gear to 7th gear or lower, a miscalculation in the TCM software causes the MIL to come on with DTC P0716 (input shaft [mainshaft] speed sensor [range/performance]).
ACURA
Reported code forms P0716
Service Bulletin - During a downshift from 9th or 8th gear to 7th gear or lower, a miscalculation in the TCM software causes the MIL to come on with DTC P0716, input shaft [mainshaft] speed sensor [range/performance].
Check vehicle applicability
3A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.